Above advanced material property pipes i.e. Jain Fire
Retardant, Jain Rodent deterrent, Jain PE – RC pipes result
in increase in the initial pipe cost as compared with normal
HDPE pipe cost. But use of above pipes results in overall
reduction in project cost which includes- pipe cost, laying
and installation cost and cost of repair and replacement.
Further efforts in reducing the pipe initial cost resulted in
development of Jain PE multilayer pipe. Jain PE multilayer
pipe is made up of two or more layers of different PE
materials to fulfill the requirements of end application and
simultaneously reducing the pipe cost. Jain Multi-Layer
Pipe (JMLP) solutions enable the installer and system
designer to reduce the overall cost of the project for a
modest increase in pipe cost, and bring additional safety to
the installation. The thickness of individual layer of material
depends on the requirement of end application.
HDPE pipe with outer layer of PE-RC material:
This is an answer to need for resistance to point loading
stresses by sharp stones in the field during installation,
glass pieces or other material which put extra pressure
on the pipe surface. Jain PE-RC pipes offers the right
solution to these harsh environment and field condition
and it is available as double layer pipe where the layers
which provides protection is an integral part of the pipe.
The inner layer of pipe is normal HDPE material whereas
in the outer layer PE100 –RC material is used to improve
its resistance to crack propagation.
